CGMZW - PITNEY BOWES P/N 520-0

Export as PDF
Product Identification

Product ID:PITNEY BOWES P/N 520-0
MSDS Date:07/10/1986
FSC:6850
NIIN:01-399-0688
MSDS Number: CGMZW

Responsible Party
INTERNATIONAL COMMUNICATION MATERIALS, INC.
ROUTE 119 SOUTH
CONNELLSVILLE, PA 15425
US

Emergency Phone: 412-628-1014/800-438-2530

Info Phone: 412-628-1014/800-438-2530

Cage: 0XPP3

Contractor
ODYSSEY GROUP THE
000 ALPHARETTA, GA 30202-7614 US

Telephone: 800-250-8716/FAX 770-754-1194

Cage: 05NL2

Ingredients

STYRENE ACRYLATE COPLOYMER


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9596


POLYPROPYLENE WAX


SILICA (AMORPHOUS)

Hazards

LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE AN IRRITANT IF INHALED.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:RESPIRATORY TRACT IRRITATION.
Medical Cond Aggravated by Exposure:CHRONIC UNPROTECTED EXPOSURE TO
TONER DUST MAY AGGRAVATE BREATHING DIFFICULTIES.

First Aid

First Aid:EYES: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: RINSE MOUTH WITH WATER.

Fire Fighting

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:WATER, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NONFLAMMABLE. USE STANDARD FIREFIGHTING
PROCEDURES FOR SURROUNDING MATERIALS IN THE FIRE.
Unusual Fire/Explosion Hazard:TONER IS COMBUSTIBLE. EXPLOSIVE LIMITS OF
TONER PARTICLES SUSPENDED IN AIR ARE EQUAL TO THAT OF COAL DUST.

Accidental Release

Spill Release Procedures:LOOSE TONER CAN BE REMOVED BY USING A VACUUM.
RESIDUE CAN BE REMOVED WITH SOAP AND COLD WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITIONS
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS
REQUIRED TO MAINTAIN EXPOSURE LEVELS.
Protective Gloves:NONE REQUIRED UNDER NORMAL CONDITIONS
Eye Protection:NONE REQUIRED UNDER NORMAL CONDITIONS
Other Protective Equipment:EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:194F,90C
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.1
Viscosity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DO NOT INCINERATE. NO SPECIAL TECHNIQUE BEYOND
NORMAL PRACTICE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.